Built for Commercial Roofing Contractors
Leading Edge Work Kills More Roofers Than Any Other Trade Hazard
Commercial roofing crews work unprotected leading edges, low-slope membrane systems, and multi-story parapet walls every day. OSHA Subpart M violations are the single most cited construction standard — and the fines are the smallest part of your exposure. Our training was built by tradespeople who've run these crews, not safety consultants who haven't.
View Course ScheduleThe Real Risks Your Crews Face
Why Commercial Roofing Has the Highest Fall Fatality Rate in Construction
Leading Edge & Unprotected Roof Edges
OSHA 1926 Subpart M requires fall protection at every unprotected edge above 6 feet. Most commercial roofing fatalities happen within 10 feet of a roof edge — on jobs where a compliant system existed but wasn't used correctly.
Personal Fall Arrest System Misuse
A harness worn incorrectly, a lanyard clipped to the wrong anchor, or a self-retracting lifeline with insufficient clearance can turn a fall arrest system into a fatal failure. Equipment alone doesn't protect workers — proper training does.
Subcontractor Liability & Insurance Gaps
When a subcontractor crew falls on your job site, the general contractor and roofing company both face OSHA citations and civil liability. Documented training for every worker on site is your primary defense — and most companies don't have it.
Gargoyle Academy — St. Louis, MO
Train on Real Roof Conditions — Not a Classroom Floor
Gargoyle Academy is the only dedicated working-at-heights training facility built for exterior trade professionals. Our facility includes actual roof pitches, parapet wall simulations, and personal fall arrest system stations that replicate the conditions your crews encounter on commercial low-slope and steep-slope roofing jobs.
Low-Slope & Steep-Slope Roof Sections
Practice fall protection setup and leading edge procedures on actual roof sections — from flat TPO membrane decks to 8:12 and 12:12 pitched surfaces.
Personal Fall Arrest System Stations
Hands-on harness fitting, anchor selection, lanyard and SRL configuration, and fall clearance calculation — the exact skills OSHA inspectors check for on commercial job sites.
Warning Line & Safety Monitor Systems
Learn when each fall protection method is permissible under Subpart M and how to set up compliant warning line systems for low-slope roofing work.
On-Site Corporate Training Available
We travel nationwide to train your entire crew — including subcontractors — on your actual job sites. Custom training plans for roofing companies of any size.
Compliance You Can Document
OSHA Subpart M Aligned. Insurer-Recognized. Trade-Tested.
OSHA 1926 Subpart M Compliant
All courses are built around OSHA's fall protection standards for construction — the most cited standard in the industry. Graduates understand not just the rules, but how to apply them on real commercial roofing jobs.
W.A.H.S.P. Certification
Graduates earn the Working at Heights Safe Practices credential — a nationally recognized certification that satisfies most insurance carrier training requirements and holds up in OSHA compliance reviews.
Fall Clearance & Anchor Load Calculations
We teach the math behind fall arrest systems — total fall distance, deceleration distance, and anchor load requirements — so your crew can make correct decisions in the field without guessing.
Instructors Who've Run Roofing Crews
Our instructors have real commercial roofing and exterior trade experience. They know the production pressure that leads to shortcuts — and they teach to the real-world conditions your crew faces, not a textbook scenario.
Common Questions
Answers for Commercial Roofing Companies
Train Your Crew Before the Next OSHA Inspection
Fall protection violations are the most cited OSHA standard in construction. Documented training is your first and best line of defense.